Home >

News

20May 2021

The Basic Accessories Of The Stripper Are Introduced

Inlet wheel: conveying wire rod and stripping wire head. Thread stripping machine in the short strip when both stripping and stripping the end of the line...
19May 2021

The Working Principle Of Stripping Machine Is Introduced

After the wire is input to the incoming line wheel through the straightener, as shown in the figure above, the incoming line roller is driven by the stepper motor...
18May 2021

The Product Quality Will Be Higher After Granulation

By particles, granular particles uniform, crushing particles uneven, material instability, gap size, melt density is not the same, some will increase the difficulty of adjustment...
17May 2021

The Main Power Unit Of Single Screw Granulator

Single screw granulator and power unit to be strong device. If the single screw granulator needs long-term fixed operation, it should be fixed on the cement foundation...
16May 2021

The Important Situation Of Granulator Utilization Link

Granulator must avoid cooling machine empty stomach operation, must heat machine feeding operation, so as to avoid sticky bar (holding shaft) phenomenon.
15May 2021

Notes For Operation Of Color Masterbatch Granulator Production Line

The plastic wire and cable insulation and sheath kneading is characterized by viscous activity based on thermoplastic deformation.
14May 2021

Treatment Of Waste Gas From Plastic Granulation

The primary principle of the method is to use the adsorption of activated carbon to organic waste gas molecules, so that the organic waste gas molecules...
13May 2021

The Structure Of Plastic Recovery Granulator

Screw: it is the most important part of the plastic granulator extruder, which is directly related to the application planning and productivity of the extruder...
12May 2021

The Characteristics Of Single Screw Granulator Are Briefly Described

Each gear in the gear reducer with hard tooth surface is heat treated and fine ground, and there is forced cooling system to ensure high efficiency, low noise and long service life.
11May 2021

Some Technical Features Of Granulator Are Introduced

In order to maintain the extrusion of plastic will not appear due to temperature reduction, lack of liquidity, hinder extrusion.
10May 2021

Technical Characteristics Of Granulator

The heating system is composed of heating rings, which are distributed outside the barrel separately. The materials in the barrel are heated and plasticized evenly.
09May 2021

Energy Saving Transformation Of Granulator

The energy saving of granulator can be divided into two parts: one is the power part, the other is the heating part.

First 12 Last 1/2

News

The Basic Accessories Of The Stripper Are Introduced

The Working Principle Of Stripping Machine Is Introduced

The Product Quality Will Be Higher After Granulation

The Main Power Unit Of Single Screw Granulator

The Important Situation Of Granulator Utilization Link

Notes For Operation Of Color Masterbatch Granulator Production Line

Treatment Of Waste Gas From Plastic Granulation

The Structure Of Plastic Recovery Granulator

The Characteristics Of Single Screw Granulator Are Briefly Described

Some Technical Features Of Granulator Are Introduced

Technical Characteristics Of Granulator

Energy Saving Transformation Of Granulator