The electrostatic separator is separated by a sponge and is an important part of the circuit recycling equipment. When particles and non-conductor materials composed of granular granular particles enter the silo at the top of the separator, the vibration motor vibrates to synchronize the granular mixing. At the same time, the negative electric roller sucks dust into the positively charged area, and the high-pressure suction area produces positive The electric roller drives the conductor particles to fall into the conductor port. With the opening of the secondary negative roller, the conductive material falls on the negative roller, and the non-conductive material is brushed off by the brush and falls into the secondary negative roller. The trace conductive particles come to separate for the second time to reach the service state. At the same time, at the same time, the middle conductor particles are completely separated from the conductive non-body particles, and the semi-conductor particles fall into the semi-conductor mouth with the upgrade. At the same time, the non-conductive body is brushed off by the brush, and the non-conductive body outlet has completed the effect of the whole system.
The level of automation of the electrostatic separator takes place and does not require too much labor. In different positions of the production line, if one part fails, it will not affect the production operation of other parts. Under the condition of fine particle size, the metal and non-metal conductive compounds can be sorted by changing the screen in the equipment and adjusting each tool. The electrostatic separator uses the electrical difference between minerals and particles, the particle force generated in high pressure and the force of gravity and centrifugal force, and the effective material is separated and sorted. In addition, you can complete the sorting and manufacture different types of machines. . The real equipment is a simple machine and a non-simple separation equipment, such as some common equipment. The rupture of metals and plastics is like the rupture material of aluminum-plastic medical boards, aluminum-plastic panels and aluminum-plastic doors and windows, as well as circuit boards and copper clad laminates. These materials are first crushed into granular powder, and then sorted by equipment. , And the sorting effect is also very good. It is great for the treatment and recycling of these garbage. The size of the material has a helping effect on the voltage. The voltage is different for different material particle size separation, so the material is separated before entering the host. It is necessary to pulverize to achieve the desired effect.
